E145
12
732784 - Rev. A
J10
BUS
2EASY
ENGLISH
Address assignment of
BUS-2EASY
photocells
To assign the address to each pair of photocells, you must set the Dip-Switches (
DS1
) located on the
transmitter and corresponding receiver.
The transmitter and receiver of a pair of photocells must have the same
DIP-SWITCH setting.
Two or more pairs of photocells must not have the same DIP-SWITCH setting.
Other programming options are available by programming via a PC/MAC (see dedicated
instructions).
Dip1
Dip2
Dip3
Dip4
TYPE OF PHOTOCELLS
OFF
OFF
OFF
OFF
OPENING (max 6 pairs)
OFF
OFF
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
ON
ON
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
CLOSING (max 7 pairs)
ON
OFF
OFF
ON
ON
OFF
ON
OFF
ON
OFF
ON
ON
ON
ON
OFF
OFF
ON
ON
OFF
ON
ON
ON
ON
OFF
OFF
ON
OFF
OFF
OPENING and CLOSING (max 2 pairs)
OFF
ON
OFF
ON
ON
ON
ON
ON
OPEN PULSE (1 pair)
Connection of
BUS-2EASY
photocells
For connecting you have to use two cables without polarity (see the specific device instructions).
DL1
= Alignment
DL2
=
BUS-2EASY
status/
Power supply
DS1
= Programming
Dip-switches
