F-SECURE INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61..., Administrator'S Manual

Page: 72 / 414

72
3.5 Upgrading F-Secure Internet Gatekeeper
This section describes the needed configuration changes, if any, when
upgrading F-Secure Internet Gatekeeper.
3.5.1 Upgrade Instructions
If you are using F-Secure Internet Gatekeeper 6.4x or 6.50, you can
upgrade it to F-Secure Internet Gatekeeper 6.61 without uninstalling the
previous version. The setup upgrades F-Secure Internet Gatekeeper
automatically and takes the previous settings into use.
Follow these instructions to upgrade F-Secure Internet Gatekeeper:
Step 1. Upgrade the product
1. Run the Setup wizard. For instructions, see ” Centrally Administered
or Stand-alone Installation? ” , 47 .
2.
Depending on the F-Secure products that are installed on the system
already, the setup suggests upgrading several or all components.
Select the components you want to upgrade.
3.
Specify how the inbound mail routing is to be handled. The table
displays the domain, IP address and port number information read
from the previous version’s configuration (see the example in the
figure below). You can also add a new inbound mail server.
IMPORTANT: F-Secure Internet Gatekeeper 6.61 uses an updated
quarantine database schema. It is highly recommended that you
make a complete backup of the existing quarantine database
before the upgrade.
IMPORTANT: F-Secure Internet Gatekeeper 6.61 cannot
reprocess the e-mails and attachments quarantined by the version
6.4x. You should handle or delete these e-mails manually, using
Windows Explorer, before or after the upgrade. They are not
deleted during the upgrade installation.