TLP 350CV • Contents
v
Contents
Introduction ...........................................
1
About This Guide ............................................. 1
About the TLP 350CV ...................................... 1
Features ........................................................... 2
Requirements ................................................... 4
Hardware and Software ............................... 4
Control Interface .......................................... 4
Preparing the Table ................................
5
Installation Overview ........................................ 5
Planning ...................................................... 5
Prepare the Cable Cubby enclosure ............. 5
Install the enclosure .................................... 5
Cutout Dimensions .......................................... 6
Double-Check before you Cut: .................... 6
Mounting the Enclosure ........................
7
Installing the Power Module, Cables
and AAPs ........................................................ 7
Assemble AAP brackets and AAPs ................ 7
Install the Power Module and
Shelf Assemblies ......................................... 8
Mounting the enclosure ................................... 9
Connecting the Touch Panel .................
10
Connecting the TLP 350CV ............................ 10
Mounting the Power Supply
(US Models Only) .......................................... 11
Using Tie wraps For Cable Strain Relief ...... 11
Initial Configuration ..............................
12
Front Panel Controls and Indicators ................ 12
Configuring the TLP 350CV (Initial Setup) ...... 13
Internal On-Screen Menus .............................. 13
IP (Network) ............................................... 16
DHCP ......................................................... 16
Video ........................................................ 16
Touchscreen Calibration ................................. 17
Configuration Software ........................
18
Software Control .......................................... 18
Installing Software ......................................... 19
System Requirements ................................. 19
GUI Configurator and Global Configurator
Installation ............................................... 20
GUI Configurator ........................................... 21
Global Configurator ....................................... 25
Reference Information ..........................
30
Specifications ................................................. 30
Part Numbers (Included Parts) ........................ 34
Pass-Through and blank AAPs (Included) .... 34
AAP brackets (Included) ............................. 34
Accessories (Optional) .................................... 35
Reset Modes, Button Replacement, Firm-
ware Updates .........................................
36
Reset Modes .................................................. 36
button Kits..................................................... 38
button Replacement ...................................... 38
Updating Firmware ........................................ 39
