Cable Cubby
®
Products • Packaging for Shipment
Packagng for Shpment
B-2
The Cable Cubby’s ultra-fine machined surfaces and moving
parts make them vulnerable to damage caused by mishandling
during shipment if they are improperly packaged. If, for any
reason, you need to return a Cable Cubby to Extron, first contact
Extron to obtain a return kit. The return kit, which reduces the
chances of damage during shipment, includes a sturdy shipping
carton and foam that can be fitted to each Cable Cubby model
(figure B-1).
Figure B-1 — Cable Cubby return kit
Package a Cable Cubby for shipment as follows:
1
.
Contact the Extron S
3
Sales & Technical Support Hotline to
obtain a return kit. Extron will send the return kit to the
location you specify.
W
The flanged edges of the top of the surface enclosure
are sharp when the Cable Cubby is removed from
the table. Exercise caution when handling to
prevent personal injury.
C
The flanged edges of the top of the surface enclosure
are bevelled to an ultra-fine thickness of less than
0.04 (4/100)” (approximately 1 mm). These
edges are soft and can be easily nicked or bent.
Exercise caution when handling and mounting the
enclosure. Mishandling can damage the appearance
of the enclosure.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
