Cable Cubby
®
Products • Packaging for Shipment
B-3
2
.
Disconnect and retain all cables, remove and retain the
AAP shelf assembly(s) (CC 300, 600, 800) and remove
the Cable Cubby from the table or desk. See Removing
and Replacing the Cubby
, steps
1
through
4
, in chapter 3,
Maintenance and Modifications
.
N
For Cable Cubby 300, 600, and 800 models, retain the
screw clamps.
3
.
Install the plastic strips that protect the flanged edges of
the top of the surface enclosure (figure B-2).
Figure B-2 — Installing protective strips
N
For Cable Cubby 200 models, proceed to step
13
.
For Cable Cubby 300, 600, and 800 models, continue to
step
4
, below.
4
.
Remove and retain the top foam pad from the carton.
5
.
CC 300, 600, and 800 only
— Remove and discard the
center foam section of the cushion in the carton (figure
B-3).
If you are returning a Cable Cubby 300 model
, this
is the correct fit. Proceed to step
8
.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
