Extron electronics Cable Cubby 200 User Manual Download Page 43

Page: 43 / 62

Cable Cubby

Products • Reference Information

A-7

Cable Cubby Part Numbers

Cable Cubby 200

Part number

Cable Cubby 200 US/domestic (powder coat finish)

60-716-01

Cable Cubby 200S international (powder coat finish)

60-717-nn

Cable Cubby 300S

Part number

Cable Cubby 300S US/domestic (black anodized finish)

60-526-01

Cable Cubby 300S international

60-712-nn

Cable Cubby 300C

Part number

Cable Cubby 300C/domestic (black anodized finish)

60-527-01

Cable Cubby 300C international

60-713-nn

Cable Cubby 600

Part number

Cable Cubby 600 US/domestic (black anodized finish)

60-525-01

Cable Cubby 600 international

60-714-nn

Cable Cubby 800

Part number

Cable Cubby 800 US/domestic (black anodized finish)

60-524-01

Cable Cubby 800 international

60-715-nn

For the international versions, the

nn in the part number

identifies the AC power connector and finish (black

anodized, brushed aluminum, polished aluminum, and

brushed brass). Specify the desired power connector and

finish when ordering.

All Cable Cubby 200 models are available in a powder

coat finsh only.

The USA versions of the Cable Cubby 300, 600, and

800 are also available in brushed aluminum, polished

aluminum, and brushed brass finishes. Visit the Extron

web site, www.extron.com, for more part numbers.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201
Fax 07131 911203

[email protected]

Summary of Contents for Cable Cubby 200































































Search results

Summary of Contents for Cable Cubby 200

Reviews:

Related manuals for Cable Cubby 200

Brands by name

Popular brands

Extron electronics Cable Cubby 200, User Manual

Search results

Summary of Contents for Cable Cubby 200

Reviews:

Related manuals for Cable Cubby 200

Brands by name

Popular brands