Cable Cubby
®
Products • Reference Information
A-11
Routng Template Part Numbers
The following reuseable sheet metal routing templates are
recommended for installation and are available
at no charge
.
Template
Part number
Cable Cubby 200 routing template
70-384-01
Cable Cubby 300S/300C routing template
70-237-01
Cable Cubby 600 routing template
70-239-01
Cable Cubby 800 routing template
70-240-01
Top Plate Dmensons
There are two
preferred
and
recommended
methods for cutting
the table: either use the appropriate metal routing template
(figure A-3 and chapter 2, Installation) and a router or use a
hole saw (Cable Cubby 300C only). The templates (see Routing
Template Part Numbers
, for part numbers) are available at no cost.
HSA 200
USER ACCESS
HSA 200
CABLE CUBBY 300
CABLE CUBBY 300
USER ACCESS
Figure A-3 — CC 300S/300C metal routing template
If you choose not to use Extron’s metal routing templates, the
cut-out templates (figure A-4, figure A-5, figure A-6, figure A-7,
and figure A-8) will help you properly prepare the mounting
surface. The cutout templates are
not to scale
and are
for
reference only
. The surface cut-out area dimensions for the
template are
marked in bold type
.
For full size paper templates, visit the Extron Web site
(http://www.extron.com) or call the Extron S
3
Sales & Technical
Support Hotline.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
