CHAPTER 73
PAGE 15
MAINTENANCE MANUAL EXTRA 300SC
PAGE DATE: 12. February 2019
Side View
555 mm
Figure 6
Clamp Sheet to Clamp Block Distance
5
Renew the sealing of the firewall breakthrough at the engine
side of the firewall. Use firewall sealant as outlined in
Chapter 51-30-04.
6
Let the sealant slightly cure before thightening the clamp
sheet attachment bolts. This will strengthen the clamping.
7
Install the clamp sheet.
8
Install the cable ties in the cockpit area on positions as
marked before.
9
Install the 540 mm firesleeve to the mixture vernier control
cable and secure with safety wire at both ends.
10
Install the mixture vernier control cable to the respective
bracket by installing the clamp block (1, Figure 8) to the
conduit fitting of the control cable.
11
Push the mixture actuator (3, Figure 8) to the full forward
position.
N O T E
It is essential that the rod end is screwed onto the
threaded terminal until the inspection hole of the rod
end is completely filled with thread (minimum 8 turns).
12
Screw the rod end onto the threaded terminal to match the
full forward travel stop mixture actuator position. Tighten
the counternut.
Summary of Contents for 300/SC
