CHAPTER 27
PAGE 20
MAINTENANCE MANUAL EXTRA 300/SC
PAGE DATE: 12. February 2019
27-20-02
Bottom Hinge Bracket
Removal/Installation
1
Remove the rudder per Chapter 27-20-01.
2
Loosen the attachment bolts.
3
Remove the bottom hinge bracket with the travel stop plate.
4
Install in reverse sequence of removal.
27-20-03
Bottom Hinge Bellcranks
Removal/Installation
1
Remove the rudder per Chapter 27-20-01.
2
Loosen the attachment bolts.
3
Remove the bottom hinge bellcranks.
4
Install in reverse sequence of removal.
27-20-04
Control Cable
General
The control cables installed have a diameter of 1/8 inch and
are built in a 7 x 19 construction. Both galvanized and
stainless steel control cables are used. The stainless steel
version must not be lubricated.
Control cable tension is ensured by retracting springs
connected to each pedal, keeping the pedals in most forward
position.
The thimble-eye splices on each cable end fitting are swaged
on. They are covered with a shrinking sleeve.
The cable sections at the S-shaped pedal adjustment cable
guide and at the fuselage skin penetration are covered with a
PTFE-hose. The fuselage skin penetration PTFE hose is held
in place by means of a shrinking sleeve.
Summary of Contents for 300/SC
