Extra 300/SC, Maintenance Manual

Page: 65 / 250

CHAPTER 27
PAGE 6
MAINTENANCE MANUAL EXTRA 300/SC
PAGE DATE: 12. February 2019
Maintenance Practices
N O T E When installing a bellcrank or control stick the spacer
sleeve inside the bearing could be displaced as shown
in Figure 3. Use a mandrel to adjust the spacer sleeve.
Figure 3 Spacer Sleeve Displaced
N O T E When installing a control surface use mandrels as
shown in the following Figure 4 to preset the control
surface. Then press out each mandrel by pushing a bolt
into the bearing.
Figure 4 Control Surface Mounting Aid