Extra 300/SC, Maintenance Manual

Page: 136 / 250

CHAPTER 32
PAGE 10 PAGE DATE: 12. February 2019
MAINTENANCE MANUAL EXTRA 300/SC
3 Install the outer spacer ring (2), place the rounded edge (8)
inboard).
4 Install the axle nut with cotter pin (1).
5 Install brake back plate (4) with lining, insulator
shim (5), and bolts (6) with washers (7). Secure bolts with
safety wire.
32-40-02 Main Wheel Fairing
The main wheel fairings are made from carbon fiber. The
layer sequence is shown on Figure 5.
Removal/Installation
The wheel fairings are screwed on.
32-40-03 Tail Wheel
Disassembly/Assembly
1 Shore the tail as per Chapter 07-20-02.
2 Remove the attachment bolt (10, Fighure 3), washers, and
stop nut.
3 Remove the tailwheel.
4 Disassemble the bearings, the wheel halves, the spacer
sleeve, and the solid ruber tire (11 thru 14, Figure 3).
5 Reverse procedure for assembly.