Extra 300/SC, Maintenance Manual

Page: 83 / 250

CHAPTER 27
PAGE 24
MAINTENANCE MANUAL EXTRA 300/SC
PAGE DATE: 12. February 2019
Removal
1 Remove the respective access panels.
2 Remove the front cable attachment bolts.
3 Remove the cable to rudder bellcrank attachment bolts.
4 Cut the control cable behind the front shrinking sleeve.
5 Remove the control cable by pulling it out to the back.
Installation
Refer to Figure 18.
Use only control cables manufactured by EXTRA
Flugzeugproduktions- und Vertriebs GmbH. Those cables
are prepared for simple installation.
1 Remove the respective access panels per Chapter 51.
2 Move the pedal adjustment in a position as shown in
Figure 16.
55
m
m
(2
.1
7’
’)
Figure 16 Pedal Adjustment Position
3 Fix pedals using templates as shown in Figure 17.