Extra 300/SC, Maintenance Manual

Page: 53 / 250

CHAPTER 20
PAGE 22
MAINTENANCE MANUAL EXTRA 300/SC
PAGE DATE: 12. February 2019
4 Remove the aircraft components out of the container. Small
parts, hardware, spinner dome and the wheel fairings you
find in the cockpit.
5 Inspect all removed items for damage prior to assembly.
Damaged items have to be replaced or if possible repaired
according to Chapter 51.
N O T I C E In order to prevent the aircraft from nosing over the
assembly has always to start with the empennage.
6 Prior to assembly remove engine cowling, main fuselage
cover, and canopy per Chapters 51 and 53.
N O T E In contrast to the instructions given in the respective
Chapters don't reinstall these items before completion
of the whole assembly.
7 Remove provisional attached rudder and vertical stabilizer
per Chapters 27 and 55.
8 Install horizontal stabilizer with elevator per Chapter 55.
The procedure described there is also applicable to the in-
stallation of the complete horizontal tail. Consider to con-
nect the ground bonding lead of the elevator too.
9 Connect elevator push pull rod actuator lever per Chapter
27-30-01.
10 Connect trim wire to the tab actuator lever using fitted
clamp.
11 Inspect for full travel and elevator deflection in relation to
stick movement.
12 Install the vertical stabilizer per Chapter 55.
13 Reinstall rudder to the vertical stabilizer per Chapter 27-
20-00.
14 Inspect for full travel and rudder deflection in relation to
rudder pedal movement.
15 Install the wing per Chapter 57.
16 Install navigation/strobe lights per Chapter 33-40-11.
17 Install propeller in accordance with MT-Propeller installa-
tion instructions E-124 latest revision.
ASSEMBLY INSTRUCTION
Assembly Instruction after Container Shipping