Exmark RADIUS, Operation Manual

Page: 51 / 84

Maintenance
Figure 52
3. Push the wire onto the spark plug.
Servicing the Spark
Plug-Kawasaki Engine
Service Interval: Every 100 hours/Yearly
(whichever comes
first)—Check the spark
plug (Kawasaki engine).
Every 200 hours/Every 2
years (whichever comes
first)—Replace the spark
plug (Kawasaki engine).
Ensure that the air gap between the center and side
electrodes is correct before installing the spark plug.
Use a spark plug wrench for removing and installing
the spark plug and a gapping tool or feeler gauge to
check and adjust the air gap. Install a new spark plug
if necessary.
The spark plug is RFI compliant. Equivalent alternate
brand plugs can also be used.
Type : NGK ® BPR4ES or equivalent
Air Gap: 0.030 inch (.76 mm)
1. Disengage the PTO and ensure the parking brake
is engaged.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Disconnect the wire from the spark plug.
B
A
g027478
Figure 53
4. Clean around the spark plug to prevent dirt from
falling into the engine and potentially causing
damage.
5. Remove the spark plug and metal washer.
Checking the Spark Plug–Kawasaki
Engine
1. Inspect the spark plug
Note:
If you see light brown or gray on the
insulator, the engine is operating properly. A
black coating on the insulator usually means the
air cleaner is dirty.
Important:
Do Not clean the spark plug.
Always replace the spark plug when it has a
black coating, worn electrodes, an oily film,
or cracks.
B A
g027479
Figure 54
1. Center electrode
insulator 3. Air gap (not to scale)
2. Side electrode
2. Check the gap between the center and side
electrodes.
3. Set the gap to 0.030 inch (.76 mm).
51