Exmark RADIUS, Operation Manual

Page: 42 / 84

Maintenance
B
A
C
D E
g027515
F
G H
Figure 33
5. If the level is low, wipe off the area around the oil
fill cap, remove cap/dipstick and add oil to the “F”
(FULL) mark on the dipstick. Exmark 4-Cycle
Premium Engine Oil is recommended; refer to
the following information for an appropriate API
rating and viscosity. Always check the level with
the dipstick before adding more oil.
Do Not
overfill.
• Crankcase Capacity: 1.9L (2 qt) when the filter
is changed.
• Recommended Oil Type: Exmark 4-Cycle
Premium Engine Oil
– API service SJ or higher
Figure 34
Viscosity table
Note:
To prevent extensive engine wear or
damage, always maintain the proper oil level in
the crankcase. Never operate the engine with the
oil level below the “L”(LOW) mark or over the
“F” (FULL) mark on the dipstick.
Checking the Engine Oil-Kawasaki
Engine
Service Interval: Before each use or daily
Important:
Do not overfill the crankcase with oil
and run the engine; engine damage may result.
1. Park the machine on a level surface, disengage
the blade control switch, stop the engine, engage
parking brake, and remove the key.
2. Make sure the engine is stopped, level, and is cool
so the oil has had time to drain into the sump.
3. To keep dirt, grass clippings, etc., out of
the engine, clean the area around the oil fill
cap/dipstick before removing it.
4. Check the engine oil level.
42