EXFO FTB-7000 Series User Manual Download

Page: 255 / 339

Analyzing Traces with the Bidirectional Analysis Application

OTDR

241

Setting General Parameters

the gridlines: You can display or hide the grid appearing on the graph’s
background. By default, the gridlines are displayed.

the graph background: You can display the graph with a black (invert
color feature) or a white background. By default, the background is
white.

Trace display mode: You can choose the way the application will
display traces on-screen and in reports. The available choices are:

Complete Trace

: to display the whole trace and full acquisition

distance.

Span

: to display the trace from the span start to the span end.

Gridlines displayed

Summary of Contents for FTB-7000 Series




















































































































































































































































































































































Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands

EXFO FTB-7000 Series, User Manual

Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands