EXFO FTB-7000 Series User Manual Download

Page: 108 / 339

Customizing Your OTDR

FTB-7000 Series

Enabling or Disabling File Name Confirmation

To select the default file format:
1.

From the

Main Menu

window, press

Quick Save

From the

Save File

dialog box, select the desired format.

Press

to save your file in the new format.

The next files will be saved in the new format.

Enabling or Disabling File Name Confirmation

By default, each time you save a file, the application prompts you to
confirm the file name.

The application will use a file name based on autonaming settings
(see

Naming Trace Files Automatically

on page 24).

Note:

The file name confirmation parameter used in the Auto, Advanced, and
Template modes is independent from the one used in the Fault Finder
mode.

Summary of Contents for FTB-7000 Series




















































































































































































































































































































































Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands

EXFO FTB-7000 Series, User Manual

Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands