EXFO FTB-7000 Series User Manual Download

Page: 233 / 339

Analyzing Traces with the Bidirectional Analysis Application

OTDR

219

Modifying the Alignment of Unidirectional Traces

To modify the alignment of A->B or B->A trace:
1.

From the main window, select the

Alignment

tab.

Under

Direction

, select

A->B

B->A

Define the span event location by moving marker

along the trace

using one of the following methods:

Drag marker

to the desired span event location.

Use the selection dial (located on the front of the unit) to move
marker

Enter a distance value in the

Position

box, and press

Use the single-arrow buttons to move marker

on the trace.

From the small table of events, press directly the row
corresponding to the existing event that you would like to
designate as a span event.

Note:

Each of these elements may lead to the creation of a new event, except the
new location corresponds to an already existing event on the trace.

Summary of Contents for FTB-7000 Series




















































































































































































































































































































































Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands

EXFO FTB-7000 Series, User Manual

Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands