EXFO FTB-7000 Series User Manual Download

Page: 41 / 339

Preparing Your OTDR for a Test

OTDR

Naming Trace Files Automatically

Press

File Autonaming

to set up the trace file name options.

In the

File Name

window, select the desired components to include in

the file name. You can change the order of apparition with the up and
down arrow buttons.

Press

to confirm your new settings.

This preview is

updated

automatically as you

make your selections

Items that can be

included in the file

name

To select the separator in
the automatic
numbering section

To add personalized
information not included
in the filename criteria

To modify the order of appearance of the
selected components in the file name

Summary of Contents for FTB-7000 Series




















































































































































































































































































































































Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands

EXFO FTB-7000 Series, User Manual

Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands