EXFO FTB-7000 Series User Manual Download

Page: 166 / 339

Analyzing Traces and Events

152

FTB-7000 Series

Analyzing or Reanalyzing a Trace

To analyze or reanalyze a trace:
1.

From the main window, go to the

Events

tab.

Press the

Analyze

button.

From the

Reanalyze Trace

dialog box, select an item for setting the

span start and end markers on the trace. On the first analysis, this
dialog box is not displayed and the default span start and end are
applied (See

Setting a Default Span Start and Span End

on page 58).

Keep current span delimiter positions

applies the current fiber

span upon trace reanalysis.

Reset span delimiters positions

applies the fiber span defined in

the

OTDR Setup

upon trace reanalysis.

Press

to confirm.

Summary of Contents for FTB-7000 Series




















































































































































































































































































































































Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands

EXFO FTB-7000 Series, User Manual

Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands