EXFO FTB-7000 Series User Manual Download

Page: 140 / 339

Analyzing Traces and Events

126

FTB-7000 Series

Setting Trace Display Parameters

Setting Trace Display Parameters

Once you have launched the desired trace acquisition mode (Automatic,
Advanced, or Template), you can change several trace display parameters:

the grid: You can display or hide the grid appearing on the graph’s
background. By default, the grid is displayed.

the graph background: You can display the graph with a black (invert
color feature) or a white background. By default, the background is
white.

the zoom window: The zoom window shows you which portion of the
graph is being magnified.By default, the zoom window is displayed.

the file name in the trace display: The file name appears at the top of
the trace display. By default, the file name is displayed.

Note:

The trace display settings used in Auto, Advanced, and Template modes are
independent from the ones used in the Fault Finder mode.

Zoom window

Grid

Summary of Contents for FTB-7000 Series




















































































































































































































































































































































Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands

EXFO FTB-7000 Series, User Manual

Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands