EXFO FTB-7000 Series User Manual Download

Page: 91 / 339

Testing Fibers in Fault Finder Mode

OTDR

Acquiring Traces in Fault Finder Mode

Once the analysis is complete, save the trace by pressing

Quick Save

in the button bar or

from the keypad.

The application will use a file name based on the autonaming
parameters you defined (see

Naming Fault Finder Files Automatically

on page 78). This file name appears at the top of the graph.

Note:

The application will only display the

Save File

dialog box if you have

activated the feature to always be prompted when you save a file

and

you did not disable the storage features. From the

Save File

dialog box, you

can change the location, the file name and the file format.

5a.

If necessary, change the folder to which the file will be saved by
pressing the

Location

button.

5b.

If necessary, specify a file name.

5c.

Press

to confirm.

MPORTANT

If you specify the name of an existing trace, the original file will be
overwritten and only the new file will be available.

Summary of Contents for FTB-7000 Series




















































































































































































































































































































































Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands

EXFO FTB-7000 Series, User Manual

Search results

Summary of Contents for FTB-7000 Series

Reviews:

Related manuals for FTB-7000 Series

Brands by name

Popular brands