EXFO FTB-5240BP, User Manual

Page: 445 / 537

Optical Spectrum Analyzer
437
A Technical Specifications
I
MPORTANT
The following technical specifications can change without notice.
The information presented in this section is provided as a reference
only. To obtain this product’s most recent technical specifications,
visit the EXFO Web site at
www.exfo.com
.
SPECIFICATIONS
a
Spectral Measurement FTB-5240S and FTB- 5240S-P FTB-5240BP
Wavelength range (nm) 1250 to 1650 1250 to 1650
Wavelength uncertainty (nm)
b
±0.05 ±0.03
±0.01
c, d
±0.01
c, d
Reference Internal
e
Internal
e
Resolution bandwidth (FWHM) (nm) f 0.065 b, d 0.033 b, d
Wavelength linearity (nm) ±0.01 b, d ±0.01 b, d
Wavelength repeatability 2 m (nm) ±0.003 g ±0.002 g
Power Measurements FTB-5240S and FTB-5240S-P FTB-5240BP HPW Option
Dynamic range (dBm) (per channel)
b
–80
h
to +18 –80
h
to +18 –70
h
to +23
Maximum total safe power (dBm) +23 +23 +29
Absolute power uncertainty (dB) ±0.5
i
±0.5
i
±0.5
i
Power repeatability 2
m
(dB)
d, g
±0.05 ±0.04
j
±0.05
j
Optical Measurements FTB-5240S and FTB-5240S-P FTB-5240BP HPW Option
Optical rejection ratio at 1550 nm (dB)
at 0.2 nm (25 GHz) 35 (40 typical) 45 (50 typical) 35 (40 typical)
at 0.4 nm (50 GHz) 45 (50 typical) 50 (55 typical) 45 (50 typical)
Channel spacing 50 to 200 GHz
CWDM
PDL at 1550 nm (dB) ±0.08
d
±0.06
d
ORL (dB)
*
40
*
40
Measurement time (s) d, j <1 (with the FTB-500 platform) <1 (with the FTB-500 platform)
(includes scanning, analysis and display)
In-Band OSNR Measurements d, k FTB-5240S-P only FTB-5240BP
OSNR dynamic range (dB) >35 l >35 l
OSNR measurement uncertainty (dB) ±0.5 m ±0.5 m
Repeatability (dB) ±0.2
n
±0.2
n
Data signals Up to 100 Gbit/s
o
Up to 100 Gbit/s
o
Measurement time (s)
d, j
<6 (eight scans with the FTB-500 platform) <6 (eight scans with the FTB-500 platform)
(includes scanning, analysis and display) <75 (eight scans with the FTB-200 platform)
Notes
a. All specifications are for a temperature of 23 °C ± 2 °C with
an FC/UPC connector unless otherwise specified, after
warm-up.
b. From 1520 to 1610 nm.
c. After user calibration in the same test session within 10 nm
from each calibration point.
d. Typical.
e. Integrated and wavelength-independent self-adjustment.
f. Full width at half maximum.
g. Over one minute in continuous acquisition mode.
h. With averaging.
i. At 1550 nm, –10 dBm input.
j. 45 nm span, full resolution, 20 peak analysis.
k. In-band OSNR measurement performed with 64 scans.
l. For an optical noise level of > –60 dBm.
m. With PMD ) 15 ps and no crosstalk, uncertainty specification
is valid for OSNR ) 25 dB. With PMD ) 15 ps and crosstalk,
uncertainty specification is valid for OSNR ) 20 dB.
n. Repeatability specification is valid for OSNR ) 25 dB.
o. Except for pol-mux and fast polarization scrambled signals.
GENERAL SPECIFICATIONS
Temperature
operating 0 °C to 40 °C (32 °F to 104 °F)
storage —20 °C to 50 °C (—4 °F to 120 °F)
Relative humidity 0 % to 95 % non-condensing
Battery life (hours) 5 (with the FTB-500 platform)
Connectors EI (EXFO UPC Universal Interface)
EA (EXFO APC Universal Interface)
Size (H x W x D) FTB-5240S module 96 mm x 51 mm x 260 mm (3 3 /
4
in x 2 in x 10 1 /
4
in)
FTB-5240BP module 96 mm x 76 mm x 260 mm (3 3 /
4
in x 3 in x 10 1 /
4
in)
Weight FTB-5240S module 1.5 kg (3.3 lb)
FTB-5240BP module 1.7 kg (3.8 lb)
LASER SAFETY
LASER SAFETY
21 CFR 1040.10 and IEC 60825-1
CLASS 1 LASER PRODUCT