30
HPS-III-Heißkanalsystem_Vorspann_BA_V-2-0_EN
Installation
Maintenance mouthpiece
Cleaning of flow channels
ask EWIKON
Mandrel
Installation of cable marker
-
-
Metal cable tie
Fixation of cables of L2X systems
-
19667
Multimeter
Measuring of resistance
-
-
Outside micrometre
Control of check dimensions
-
-
Oxy-acetylene burner
Deinstallation of a screw bush
-
-
Pin punch
Maintenance work
Various
-
Pipe wrench
Exchange of thermocouples
-
-
Protective jaws
Protection of hot runner component
surfaces which are serviced in a vice
outside the injection moulding machine
Material: aluminium
Ring end fitting
Installation / deinstallation of
tip inserts. Installation with torque
wrench only
Closed
-
Ring spanner insert
Exchange of HPS III-MH thermocouples
-
-
Ring wrench
Deinstallation of tip inserts
Closed
Scraper, soft
Cleaning of e.g sealing surfaces
Preferably brass wire, do not use steel
wire
-
Screw or threaded bar
Installation of HPS III-MH
tip inserts
M4
-
Slotted screwdriver
Maintenance work
Various
-
Side cutter
Cutting cable binders to size
without any risk of injury
Removal of "cap" (see chapter
„6.3.3 Colour and material changes“)
Preferably side cutter for electronics
Snap ring pliers
Deinstallation of snap rings of drive
units
-
-
Soft face hammer
Maintenance work
-
-
Spacer bolt for swivel eye
bolt
Lifting and moving of hot halves,
systems (L2X) and plate assemblies
-
19160
Spreading pliers
Installation of cable marker
-
-
Striking weight
Deinstallation of a screw bush,
Maintenance of L2X systems
Deinstallation / exchange of valve pins
-
10578
Striking weight with
forked adapter
Exchange of thermocouples
-
-
Swivel eye bolt
Lifting and moving of hot halves,
systems (L2X) and plate assemblies
Swivel eye bolt according to Machinery
directive 2006/42/EG or DIN EN 1677-1,
min. grade 8 =
500 kg load capacity with
inclination angle α = 0°.
In case of deviations of the angle α > 0°
load capacity has to be reduced accor-
ding to the manufacturers' instructions.
-
Thread adaptor
Deinstallation of a screw bush
M5
280016-15
Threaded rod for assembly
Assembly of pistons for drive units,
Exchange of seal kits
Deinstallation / exchange of valve pins
Various
See HPS III-
NV catalogue
Torque wrench
(calibrated)
For even preload
4-400 Nm (3-295 ft-lb) depending on
system and components
-
Torx screwdriver
Maintenance work
Various
-
Tubular hexagon spanner
Installation of valve pins
Various
See HPS III-
NV catalogue
Vice
Maintenance work
-
-
Tool
Use
Version
EWIKON
item no.
