18
HPS-III-Heißkanalsystem_Vorspann_BA_V-2-0_EN
Functional description of the HPS III hot runner system
4. Functional description of the HPS III hot runner system
The schematic diagrams of the components of a HPS III hot runner system and the installation space shown in this docu-
ment should not be regarded as the only valid general layout but only present one of many possible assembly configura
-
tions.
Pos. 1 Injection mould with hot runner system
Pos. 1.1 Moving mould half (ejector side)
Pos. 1.2 Fixed mould half (nozzle side)
Pos. 1.3 Hot half (nozzle side without contour plate)
Pos. 2 Locating ring
Pos. 3 Sprue bush
Pos. 4 Hot runner manifold
Pos. 5 Hot runner nozzles
Pos. 50 Insulating plate (optional)
Pos. 51 Clamping plate
Pos. 51.1 Clamping plate
with drive unit for valve gate nozzles
z349-03
Picture 2: Layout of an injection mould with HPS III hot runner system for the processing of thermoplastic resins
Pos. 52 Nozzle retainer frame plate
Pos. 53 Contour plate
Pos. 54 Guide bolts
Pos. 55 Moulded part
Pos. 56 Cavity
Pos. 57 Contour plate
Pos. 58 Riser
Pos. 59 Ejector plates
Pos. 60 Ejector pins
Pos. 61 Clamping plate
Pos. 62 Ejector bolts
