5.8.
Output Status Tab
The Output Status tab is only used when the card is in daisy chain mode, when there are more than 8
inputs.
1. Output Status
These Output Status items are only used for debugging purposes, to monitor the health of the card's
connections. For further information on how to configure daisy chain mode, please refer to "Daisy
Chain Mode" on page 6.
Chain ID
. This is the unique identifier of the daisy-chain. The same number should be specified on all
the cards in a multi-card multiviewer setup.
Chain Nr
. This number indicates the position of the card in the chain. It is 0 for the first or for a single
card. The number is incremented by 1 for each card in the chain, e.g. in a 5-card setup, the Daisy
Chain number will be 0, 1, 2, 3, 4 for the 1st, 2nd, 3rd, 4th and 5th cards respectively.
Chain Value
. This value should be 0 for the system to function correctly.
Chain Delay
. The Daisy Chain Delay status object provides information about the introduced
progression delay on the Daisy Chain between two adjacent cards in a multicard setup. The value
itself is not very important, but typically it is expected that the values should remain more or less
constant.
Head Lock
. This item shows whether the output is locked to the ref.
INSTALLATION AND OPERATION MANUAL
Synapse MGU100 - MGG100 | 5. Graphical User Interface |
33
