LTC
Offset
: Here you can set a time difference, e.g. to display the local time if the output content is
being broadcast from another time zone.
Status 1 / 2
. This enables you to see the connection statuses of the
LTC1
and
LTC2
inputs on the
Dsub connector of the backplane.
8. Hardware Monitoring
Temp
: The fields here show the temperature of the CPU and the current FPGA core temperature. A
sensor is located next to the CPU. The temp range will be between -40° and 125°C.
Fans
: Indicates the speed of the CPU fan. Can be between 0rpm and 32767rpm.
Power
: This status will show the power consumption of the MV board. The power consumption
range will be between 0W and 50W.
9. Audio Metering Settings
For Heads A and B, you can configure the following settings:
Meter Scale
: Defines the scale to be used for displaying the loudness.
Meter Range
: The total range is identified automatically according to the defined scale.
Middle Range
: Loudness in this range is displayed in amber on the audio meter bars.
Top Range
: When the loudness reaches this range, it will be displayed in red on the audio bars.
22
| December 2021 | Issue 1.00.B
