•
Border, UMD and tally brightness adjustment
•
Safe area markers
•
Automatic 4:3 and 16:9 modes through VI or WSS triggers (SD SDI inputs)
•
GPI control for Aspect ratio, Full screen or quad mode and Tally
•
Locks to Bi-level, Tri-level syncs or SDI input
•
Full control and status monitoring through the front panel of the SFR04 / SFR08 / SFR18 frame and
the Ethernet port (ACP1).
Position of the Inputs on Output
Default positions of the inputs on the head:
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
GPI Contacts
With the local GPI contacts you can control (in settings) the following objects:
•
Full screen or eight-split
•
Tally and Border indication
•
Counter
Please refer to "Block Schematic" on page 43 for the connections.
Updating the Card
This card has an unconventional way of updating with new or other firmware. For an explanation of how
this is done, please refer to the
Synapse Module Reprogramming Guide
, which can be downloaded
from the EVS website.
INSTALLATION AND OPERATION MANUAL
Synapse MGU100 - MGG100 | 4. The MGU100 / MGG100 Card |
11
