Adjusting Display/Tally Color: ZLaaIIcc<cr>
ZL
command identification “display set”
aa
UMD address in HEX form as selected at the UMD
II
display number or tally led –number from left to right
00
1st Display
1
2nd Display
80
1st Tally LED
81
2nd Tally LED
82
3rd Tally LED
83
4th Tally LED
cc
Color-Code
00
Black
11
Green
21
Red
31
Amber
<cr>
carriage return (end and sync character)
Adjusting the display and tally brightness ZSaadbb<cr>
ZS
command identification “display and tally brightness”
aa
UMD address in HEX form as selected at the UMD
d
display
bb
Brightness (00..64 HEX notation)
<cr>
carriage return (end and sync character)
TSLv3.1
This protocol sets out to define the method of communication between a TSL controller and peripheral
devices on a multi-drop device bus. The protocol described is for one way communication only. It details
physical layer, link layer and message structure.
Electrical
RS 422/ RS 485
8 bit data
1 stop
even parity
38k4 baud
INSTALLATION AND OPERATION MANUAL
Synapse MGU100 - MGG100 | Appendix 1: Supported Protocols |
47
