It is possible to synchronize the internal clock to an NTP server. This way, with Time Source set
to
NTP
(default), the clock will indicate the correct NTP time corresonding to the NTP Server and
Timezone settings.
VITC/ATC Input
. When the Timecode is is taken from SDI, the user needs to assign which input
this refers to. This can be selected from input-1 through input-8. The default setting is input-1.
Counter
. This option modifies the clock display to enable a stopwatch function.
Offset
. Here you can set a time difference, e.g. to display the local time if the output content is
being broadcast from another time zone.
c.
Window Size
X
sets the vertical position of the first on-screen graphical clock. Can range from 0% (top) to
100% (bottom) of the total head height. By default it is set to 1%.
Y
sets the horizontal position of the first on-screen graphical clock. Can range from 0% (left) to
100% (right) of the total head width. By default it is set to 63.5%.
Width
sets the first on-screen clock width. Can be set from 2.5% to 100%. Note that the Clock
will always be forced completely round. So when the height is set smaller than the width, the
width will be adjusted to the same value as height. Default is 23%.
Height
sets the first on-screen clock height. Can be set from 2.5% to 100%. Note that the Clock
will always be forced completely round. So when the width is set smaller than the height, the
height will be adjusted to the same value as the width. Default is 23%.
The dimensions can be quickly changed by selecting the corner of the window and dragging it
to the required size.You can also reposition a window within the head by clicking inside it, then
dragging and dropping it to the required position.
Notes Settings
18
| December 2021 | Issue 1.00.B
