When editing parameters, pressing ► twice will reset the value to its default setting.
How to Change Parameters Using the Front Panel Control
With the display as shown below:
Pressing
selects the SFS10 in frame slot 01.
The display changes to indicate that the SFS10 has been selected. In this example the Settings menu
item is indicated.
Pressing the
selects the menu item shown, in this example Settings.
(Pressing
or
will change to a different menu, e.g. Status, Events).
The display changes to indicate that the SFS10 Settings menu item SDI-Format has been selected and
shows that its current setting is Auto.
Pressing the
selects the Settings item shown, in this example SDI-Format.
(Pressing
or
will change to a different setting, e.g. Mode, H-Delay).
The display changes to indicate that the SFS10 Edit Setting menu item SDI-Format has been selected.
4
| December 2021 | Issue 1.00.B
