Evoqua WALLACE & TIERNAN DEPOLOX 400 M, Operating Manual, Page: 8 / 152

8
WT.050.700.000.DE.IM.0319
Safety
DEPOLOX
®
400 M
2.
State-of-the-art technology The disinfection analyzer has been constructed in accordance with the
technological state-of-the-art and the accepted rules of safety engineer
-
ing. However, if the disinfection analyzer is used by persons who have not
been adequately instructed, danger to the life and limb of such persons
or third parties and damage to the unit itself or to other property cannot
be ruled out. Work not described in this operating manual must be per
-
formed only by authorized personnel.
Personnel The operator of the overall system must ensure that only authorized and
qualified specialist personnel are permitted to work with and on the
disinfection analyzer. “Authorized specialist personnel” are trained, skilled
personnel employed by the owner/operator, the manufacturer or, if
applicable, the service partner. Work on electrical components must be
carried out by qualified electricians.
Spare parts / components Trouble-free operation of the disinfection analyzer is only guaranteed if
original spare parts and components are used in precisely the combina
-
tion described in this operating manual. Failure to observe this instruction
may lead to malfunctions or damage to the disinfection analyzer.
Extensions and conver
-
sions
Any modifications, extensions or conversions to the disinfection analyzer
that could impair its safety require the written approval of the manufacturer.
Electrical power Only qualified electricians or trained personnel supervised by a qualified
electrician are permitted to perform any work on electrical components
and must do so in accordance with valid electro-technical regulations.
During normal operation, the controller must remain closed. Connect
power cables in accordance with the wiring diagram.
Danger!
Risk of injury or death!
External voltages may still be connected even if the operating voltage is
switched off. In the event of a fault in the electrical power supply, switch
the disinfection analyzer off immediately.
IT security The manufacturer offers IT security mechanisms for its products to sup
-
port secure system operation. We recommend checking on a regular
basis to see what information is available regarding IT security develop
-
ments for your products. Information on this can be found on the Internet.
Moreover, for the safe operation of an installation, it is also necessary to
integrate the automation components into a holistic IT security concept
which comprises the entire system and is in accordance with the state of
the art in IT technology. Integrated products from other manufacturers
should also be taken into account.
During commissioning of the disinfection analyzer, the factory-configured
passwords and user names should be replaced with individual ones and
the user administration enabled.
Disposal Ensure safe and environment-friendly disposal of agents and replace
-
ment parts. Dispose of electronic waste in accordance with local and
national regulations.