DEPOLOX
®
400 M
Installation
5.
67
5.4.14
Connecting sensors
Please note
The sensor cable glands on the electronic module are special cable
glands and are already fitted with special sealing inserts at the factory.
Threaded locking bolts are fitted in the cable glands at the factory. These
must be removed during installation in order to install the corresponding
sensor cables.
Cable glands
The Ethernet cable(s) are connected via the cable glands with connec
-
tors (A, larger opening). A maximum of two cables can be connected with
the enclosed double sealing insert. The other cable glands can be used
as required. Multiple sealing inserts (4x5 mm, 2x6 mm) are included with
the accessories.
Image 14Section, electronic module - cable glands
A Cable gland for Ethernet cable
B Cable gland for pH or fluoride sensor
C Cable gland for 3-electrode or membrane sensors
and multi-sensor
D Cable gland for LED glow stick
Flow cell module DEPOLOX
®
5 C and VariaSens C
Proceed as follows to connect the sensors of the flow cell modules with
the electronic module:
1
Remove the red sealing plug (position A).
2
Plug multi-sensor into the flow control valve (position A).
3
Route the sensor cable of the 3-electrode cell or the membrane sen
-
sor into the electronic module through the corresponding cable
gland.
Image 15Section, flow cell module DEPOLOX
®
5 C, pressurized version
A Multi-sensor on the
flow control valve
A B CD E
A
A
Summary of Contents for WALLACE & TIERNAN DEPOLOX 400 M
