Evoqua WALLACE & TIERNAN DEPOLOX 400 M, Operating Manual, Page: 48 / 152

48
WT.050.700.000.DE.IM.0319
Interfaces
DEPOLOX
®
400 M
4.
400156 --
400158 --
(Ch.5) Temperature
400160 Measured value FLOAT 4 RD - -
400162 Measurement unit ASCII 10 RD - - °C
400167 Range start FLOAT 4 RD - -
400169 Range end FLOAT 4 RD - -
400171 -- 4 RD
400173 -- 4 RD
[400300-400399] Status messages (read only)
400300 Alarm states UINT16 2 RD 0x0001 - Alarm 1
0x0002 - Alarm 2
0x0004 - Alarm 3
0x0008 - Alarm 4
0x0010 - Alarm 5
0x0020 - Alarm 6
0x0040 - Alarm 7
0x0080 - Alarm 8
400301 Digital input UINT16 2 RD 0x0001 - Sample water STOP - DI1
0x0002 - DI 2
0x0004 - DI 3
0x0008 - DI 4
0x0010 - DI 5
(open=1, closed=0)
400302 Relay outputs K1..K8 UINT16 2 RD 0x0001 - Relay K1
0x0002 - Relay K2
0x0004 - Relay K3
0x0008 - Relay K4
0x0010 - Relay K5
0x0020 - Relay K6
400303 --- UINT16 2 RD
400304 Operation mode con
-
troller 1 (Chlorine)
UINT16 2 RD 0x0001 - Manual
0x0002 - Automatic
0x0004 - Controller Off
0x0008 - Auto tune running
0x0010 -
0x0020 - Controller STOP (Yout=0%)
0x0040 - Controller freeze (Yout=Yout)
0x0080 - Controller Yout=100%
0x0100 -
0x0200 -
0x0400 -
0x0800 - Eco mode switchover
0x2000 - Controller Standby
400305 Operation mode con
-
troller 2 (pH)
UINT16 2 RD Bit coding as for controller 1
400306 --
400307 --
400308 --
400310 Fault code Disinfec
-
tion (Ch.1)
UINT32 4 RD 0x00000001 - Zero point calibration
0x00000002 - DPD calibration
400314 Error code pH/fluoride
(Ch.2) UINT32 4 RD Bit coding as for error code chlorine
MB
register Name Type No.
byte Access Max. Min. Description