DEPOLOX
®
400 M
Operation
6.
107
6.6.5
Temperature calibration multi-sensor
System menu
Calibration
T
EMPERATURE
MEASURE
-
MENT
MENU
Proceed as follows:
1
Press the
symbol.
2
Press the menu
Calibration.
3
Tap the measurement “Temperature.”
4
Press the parameter “Cal. value.”
5
Perform comparative temperature measurement.
6
Use the keypad to enter the value to be calibrated.
7
Press "Enter" to save the entry.
This concludes the temperature calibration.
6.7
Faults and remedies
6.7.1
Messages, alarms and errors
Messages, alarms and errors are displayed on the electronic module with
the colored message symbol
. Error messages can occur that can be
acknowledged or that can not be acknowledged. If several messages
occur at the same time, the number of messages appears next to the
symbol. Press the message symbol
to display the message window.
Configured alarms, messages that can be acknowledged and errors are
displayed as clear text. A time-stamp shows when the message was acti
-
vated.
Acknowledgeable messages
Acknowledgeable messages are displayed in red. They are acknow
-
ledged via the message window and the green ACK button.
Error message
Cause
Remedy
Maximum dosing
time?
The maximum dosing time set for a
control output has been exceeded.
Identify the cause, e.g. chemicals tank
empty.
Check the dosing pump.
Summary of Contents for WALLACE & TIERNAN DEPOLOX 400 M
