DEPOLOX
®
400 M
Maintenance
7.
111
7. Maintenance
Danger!
Risk of injury or death!
External voltages may still be connected even if the operating voltage is
switched off.
Please note
Liability for defects can only be accepted if maintenance work is per
-
formed as specified. Adhere to the applicable standards and national and
regional regulations.
7.1
Maintenance intervals
The electronic module offers the option of using automatic maintenance
and calibration check intervals for disinfection, and pH and fluoride mea
-
surement. In as-delivered status, the maintenance and calibration inter
-
vals are disabled. To enable the maintenance intervals for disinfection,
pH and fluoride measurement, proceed as follows:
1
Call up the Home menu.
2
Select the desired measurement (e.g. Chlorine free). The menu
“Measurement” opens.
3
Tap the menu
Settings. The settings menu for the selected mea
-
surement opens.
4
The menu “Maintenance interval” opens.
5
To enable the maintenance interval, set the parameter “Message” to
“On” under the heading Cells and, under the parameter “Interval,”
enter the number of days after which you wish to receive a reminder
to carry out sensor calibration.
When the set interval expires, an orange message appears on the
electronic module reminding you to carry out sensor calibration. The
message can be acknowledged via the message system.
To reset the maintenance interval, tap the “Execute” button under the
heading “Cell.” The date on which the next maintenance is due is
recalculated and displayed under “next maintenance on.”
Summary of Contents for WALLACE & TIERNAN DEPOLOX 400 M
