evertz 3080UEP Series User Manual Download

Page: 56 / 62

3080UEP Series

Professional 3G/HD/SD Universal Contribution Encoding Platform

Page - 48

Revision 0.2

Audio Prod Info:

This parameter allows the user to set Dolby metadata authoring audio product

information to either exists or does not exist.

Mix Level:

This parameter allows the user to set the mix level for a program.

Room Type:

This parameter allows the user to configure Dolby metadata authoring room type.

Options include Not Indicated, Large Room XCurve Monitor or Small Room Flat Monitor.

Copyright:

This parameter allows the user to configure Dolby metadata authoring copyright value to

either Copyrighted Material or Not Copyrighted.

Original Bitstream:

This parameter allows the user to indicate in the Dolby metadata if it is original

bitstream.

Preferred DownMix:

This parameter allows the user to configure Dolby metadata preferred

downmix. Options include Not Indicated, Lt/Rt Downmix or Lo/Ro Downmix.

Lt\ Rt Center DownMix:

This parameter allows the user to configure Dolby metadata authoring Lt/Rt

center downmix. Values include 3.0dB, 1.5dB, 0.0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB or Mute.

Lt\ Rt Surround DownMix:

This parameter allows the user to configure Dolby metadata authoring

Lt/Rt surround downmix. Values include 3.0dB, 1.5dB, 0.0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB or Mute.

Lo\ Ro Center DownMix:

This parameter allows the user to configure Dolby metadata authoring

Lo/Ro center downmix. Values include 3.0dB, 1.5dB, 0.0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB or Mute.

Lo\ Ro Surround DownMix:

This parameter allows the user to configure Dolby metadata authoring

Lo/Ro surround downmix. Values include 3.0dB, 1.5dB, 0.0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB or
Mute.

Dolby Surround EX:

This parameter allows the user to configure Dolby Surround EX encoding.

Options include Not Indicated, not EX Encoded or Dolby EX Encoded.

DC Filter:

This parameter allows the user to enable or disable Dolby metadata DC filter.

Lowpass Filter:

This parameter allows the user to enable or disable Dolby metadata lowpass filter.

LFE Lowpass Filter:

This parameter allows the user to enable or disable Dolby metadata LFE

lowpass filter.

Surround Phase Shift:

This parameter allows the user to enable or disable Dolby metadata

surround phase shift.

Surround 3 db Attenuation:

This parameter allows the user to enable or disable Dolby metadata

surround 3 dB attenuation.

RF Overmod Protect:

This parameter allows the user to enable or disable Dolby metadata RF

overmod protect.

RF Mode:

This parameter allows the user to configure Dolby metadata RF mode. Options include

none, film Standard, film Light, music Standard, music Light or speech.

Summary of Contents for 3080UEP Series































































Search results

Summary of Contents for 3080UEP Series

Reviews:

Related manuals for 3080UEP Series

Brands by name

Popular brands

evertz 3080UEP Series, User Manual

Search results

Summary of Contents for 3080UEP Series

Reviews:

Related manuals for 3080UEP Series

Brands by name

Popular brands