3080UEP Series
Professional 3G/HD/SD Universal Contribution Encoding Platform
Page - 20
Revision 0.2
Total TS Bit Rate:
This parameter allows the user to select the output TS Bitrate in kbps. The
3080UEP will automatically adjust the bitrate for video based on audio and advanced PID
configuration to maintain the set TS bitrate.
TS Encapsulation Type:
This parameter allows the user to select the output encapsulation type.
The options are UDP or RTP.
Encoder Enable:
This parameter allows the user to enable or disable streaming out of the UEP.
This will stop the IP output and the ASI output when disabled.
Encoder Type:
This parameter allows the user to set the encoder type. Options include 4:2:2 10-
bit, 4:2:2 8-bit or 4:2:0 8-bit.
Encoder Controls – Basic
Program Number:
This parameter allows the user to set the program number of the output stream.
PMT PID:
This parameter allows the user to select the PMT PID number of the output stream.
Video PID:
This parameter allows the user to select the Video PID number of the output stream.
PCR PID:
This parameter allows the user to set the PCR PID number of the output stream. If set
for the same value as Video PID the PCR will be combined with the Video PID.
Encoder Controls – Tables
Digital Television Standard:
This parameter allows the user to select the DTV tables to use. The
options are MPEG2 or DVB.
Program Name:
This parameter allows the user to enter the DVB program name.
Provider Name:
This parameter allows the user to enter the DVB provider name.
Service Type:
This parameter allows the user to set the DVB service type. Options include Digital
TV, Digital Radio, Teletext, NVOD Reference, NVOD Timeshifted, Mosaic, PAL Signal, SECAM
Signal, DMAC, FM Radio, NTSC Signal or Data Broadcast.
Network ID:
This parameter allows the user to set the DVB network ID number.
Encoder Controls – Advanced
Metadata:
These parameters allow the user to set the Metadata PID number, have the PID enable or
disable and select the max bitrate in kbps. If the max bitrate is exceeded the PID will be limited and
only Metadata packets will be dropped so other stream components are unaffected. The Metadata
PID is a custom Evertz signal that can be disable in most applications. It can be used to carry
proprietary data.
LTC:
These parameters allow the user to set the LTC PID number, have the PID enable or disable
and select the max bitrate in kbps. If the max bitrate is exceeded the PID will be limited and only LTC
packets will be dropped so other stream components are unaffected.
The LTC PID is a custom Evertz signal that can be disabled in most applications. It can be used to
carry proprietary data.
SCTE 35:
These parameters allow the user to set the SCTE 35 PID number, have the PID enable or
disable and select the max bitrate in kbps. If the max bitrate is exceeded the PID will be limited and
