evertz 3080UEP Series User Manual Download

Page: 45 / 62

3080UEP Series

Professional 3G/HD/SD Universal Contribution Encoding Platform

Revision 0.2

Page - 37

G Gamma Value:

This parameter allows the user to adjust the green portion of the gamma

correction factor.

B Gamma Value:

This parameter allows the user to adjust the blue portion of the gamma correction

factor.

Min R:

This parameter allows the user to adjust the minimum gain for the Cr component in YCrCb

domain. NOTE: The range in the card is from -50% to 100% in 0.1% steps.

Max R:

This parameter allows the user to adjust the maximum DC offset of the Cr component in +/-

200 quantization steps.

Min G:

This parameter allows the user to adjust the minimum gain for the G component in the RGB

domain. NOTE: The range in the card is from -50% to 100% in 0.1% steps.

Max G:

This parameter allows the user to adjust the maximum DC offset of the G component in +/-

200 quantization steps.

Min B:

This parameter allows the user to adjust the minimum gain for the B component in the RGB

domain. NOTE: The range in the card is from -50% to 100% in 0.1% steps.

Max B:

This parameter allows the user to adjust the maximum DC offset of the B component in +/-

200 quantization steps.

Black Soft Clip Knee Size:

This parameter allows the user to adjust the gain for the Cb component

in YCrCb domain. NOTE: The range in the card is from -50% to 100% in 0.1% steps.

White Soft Clip Knee Size:

This parameter allows the user to adjust the DC offset of the Cb

component in +/- 200 quantization steps.

Video Proc Reset:

This parameter resets the video proc controls to default. NOTE: This control is

write-only. It will return force when read. If set to force, all parameters under
itxe3080VideoProcControls node must be refreshed.

Summary of Contents for 3080UEP Series































































Search results

Summary of Contents for 3080UEP Series

Reviews:

Related manuals for 3080UEP Series

Brands by name

Popular brands

evertz 3080UEP Series, User Manual

Search results

Summary of Contents for 3080UEP Series

Reviews:

Related manuals for 3080UEP Series

Brands by name

Popular brands