3080UEP Series
Professional 3G/HD/SD Universal Contribution Encoding Platform
Page - 32
Revision 0.2
Data Port 1-2 Control
IP Address:
Allows user to set the IP Address for Data Port 1 and Data Port 2.
NetMask:
Allows user to set the Subnet NetMask for Data Port 1 and Data Port 2.
Gateway:
Allows user to set the Gateway for Data Port 1 and Data Port 2.
Data Port 1-2 Monitor
SFP Part Number:
This parameter returns the part number of the SFP located in the Data Port.
Link Status:
This parameter returns the link status for Data Port 1 and Data Port 2. The status could
be either Up or Down.
Link Info:
When the link is Up, this parameter returns link speed & duplex mode information for Data
Port 1 and Data Port 2.
Receive Bandwidth:
When the link is Up, this parameter returns the receive bandwidth currently
being read on Data Port 1 and Data Port 2. Reading is in kbps.
Transmit Bandwidth:
When the link is Up, this parameter returns the transmit bandwidth currently
being sent on Data Port 1 and Data Port 2. Reading is kbps
.
Figure 5-2: WebEasy – System cont.
Encoder Control
Encoder SDI Input
: 3080UEP has 2x 3G/HD/SD SDI input interfaces.
This parameter is used to
select the SDI input for all encoders.
Input Video Standard:
This parameter allows the user to enter a fixed video standard expected at
the input. Auto is the default control however if a standard is not expected to change it may be
selected and the UEP will not auto search improving lock time
.
