H9 User Guide
System Mode
31
System Mode
System Mode is used for settings that affect the overall system such as the Bypass, Aux
Switch, MIDI, etc.
To Enter/Exit System Mode
Press and hold the HOTKNOB button and Right Footswitch simultaneously for a few seconds
to enter and exit the System Mode. Upon entering System Mode, you’re at the top-level
menu selection. The Left and Right Footswitch LEDs will flash RED continuously to remind you
that you’re in this special mode. The Edited LED is OFF in System Mode.
At the top-level, turn the Knob to scroll through the choices: [BLUE], [BYPASS], [AUX SW],
[MIDI], [GLOBAL], [TUNER] and [UTILS]. Press the HOTKNOB button to select one of these
choices.
System Mode Navigation
General navigation of the System Mode menus/parameters is as follows:
1)
Push the HOTKNOB button to step down into the menu tree.
2)
Turn the Knob to scroll thru menu items or parameter selections or values.
3)
Press the PRESETS button to step up the menu tree to upper level menu options.
For sub menus with two fields, press the Left or Right Footswitch to select the active field. The
Footswitch LED corresponding to the active field will be lit.
Hint: While the PRESETS button can always be used to step up the menu tree, for menu items
that are only one level deep, pressing the HOTKNOB button a second time will also step up to
the top level.
Summary of Contents for H9
Page 1: ...H9 Harmonizer User Guide ...