H9 User Guide
System Mode
35
Note: When a Preset is loaded, the switches assume the MIN VAL for the assigned
parameters. Pressing the switch for the first time after a Preset load, will change the
parameter to MAX VAL.
To Setup the External Control Source
Press the Right Footswitch to select one of three Aux Switches. There are two ways to select
the Aux Switch - Manual Select or Learn Mode.
For Manual Select, turn the Knob to choose the Aux Switch. The choices are:
[TIP] - Aux switch jack tip connection
[RNG] - Aux switch jack ring connection
[T+R] - Aux switch jack tip + ring connection
Note: If [EXPTIP] is set to [PEDAL] in [UTILS] only [RNG] is available.
To use the Learn Mode to select the external control source, press the Right Footswitch again.
“LEARN” is displayed prompting you to press an Aux Switch for automatic assignment. Press
the Right Footswitch again to exit LEARN mode and revert to manual source selection.
Press the Left and Right Footswitches to toggle between Source and Destination to make as
many assignments as you wish. The default settings for Aux Switch control are as follows:
[BYP.TIP]
[PR+.T+R]
[PR-.RNG]
Note that the other Control Destinations ([PSW], [TAP], [KB0]-[KB9], and [TUN]) are
unassigned as indicated by [---].
When done, Press the PRESETS button to go to top level System menu.
[MIDI] - MIDI Functions
After entering System mode, turn the Knob to select [MIDI], and then press the HOTKNOB
button to enter the MIDI functions settings mode.
Turn the Knob to scroll through the MIDI functions including MIDI Program maps, MIDI
channel, MIDI Data Dumps, etc.
[RCV CH] – Set the MIDI Receive Channel (OFF, OMNI, 1-16)
Press the HOTKNOB button to select. Turn the Knob to set the MIDI Receive Channel option.
You can select a MIDI Channel number [1] –[16], turn OFF MIDI receive or choose OMNI to
receive on all MIDI channels.
Press the PRESETS button once to back-up one level to MIDI menu.
Press the PRESETS button twice to go to top level System menu.
[XMT CH] – Set the MIDI Transmit Channel (1, 2-16)
Press the HOTKNOB button to select. Turn the Knob to set the MIDI Transmit Channel.
Press the PRESETS button once to back-up one level to MIDI menu.
Press the PRESETS button twice to go to top level System menu.
Summary of Contents for H9
Page 1: ...H9 Harmonizer User Guide ...