H9 User Guide
The Basics
8
judged to be ‘most important’ by the Preset creator. All of our algorithms however have more
than three parameters.
To access additional parameters, press and hold one of the buttons. “EXPERT” will display.
Repeatedly pressing the button will step through all of the parameters for the current Preset.
In “EXPERT” mode, the parameter’s value is displayed. Turn the Knob to change the
Parameter value.
TIP: Some parameters (e.g. Delay time) have a wide range and you may want to ‘fine tune’
their value. Press the Knob and it becomes a fine tune adjustment dial. When fine-tuning, the
LightRing LEDs are unlit. Press again to return to ‘coarse’ adjustment.
To display the Parameter value without changing it, simply press the Knob.
To return to “NORMAL” mode, press and hold the currently lit button.
The X, Y, and Z buttons behave independently so any or all can be in EXPERT or NORMAL
mode. For example, you may want the X button to always control MIX, while using the Y and
Z to each have access to multiple parameters.
HOTKNOB button
HOTKNOB is a custom top-level parameter patch that allows the Knob to control any
combination of the parameters simultaneously. When the HOTKNOB button is pressed the
Knob becomes, in effect, an on-board Expression Pedal. The HOTKNOB (and Expression Pedal)
are used by all of the factory-supplied Presets. Programming the HOTKNOB is described later
in this User Guide.
PRESETS Button
To select and load a Preset press the PRESETS button and turn the Knob stopping when the
desired Preset Name appears. Presets automatically load when using the Knob. When a Preset
is loaded the full Preset Name will scroll once across the display.
To instead select and load an Algorithm, after pressing the PRESETS button to enter PRESET
selection mode, press it again to switch into ALGORITHM selection mode and turn the Knob
stopping when the desired Algorithm name appears. Pressing the PRESETS button again will
switch back to PRESET selection mode.
Pressing and holding the PRESETS button, enables the Save Preset Mode. Saving presets is
described later in this User Guide.
TIP: Pressing the PRESETS button when it is already lit will show the name of the current
Algorithm.
Summary of Contents for H9
Page 1: ...H9 Harmonizer User Guide ...
