Manual instruction MM850482 ed.04
7
2
PHYSICAL DESCRIPTION
The UniGas
portable analyzer consists of a rugged and compact case, a mother board with all base function
circuits, 1 or 2 electrochemical cells, a gas pump, a keyboard, an LCD back-lit display, a Ni-MH rechargeable
battery pack and, optionally, an impact printer.
The 2 pieces of the case are jointed by 8 screws. The batteries, the pneumatic circuit and the cells are
positioned in the rear of the analyzer and 2 screws locking the lid.
A pressure lid allows easy removal of the paper roll.
Built-in optional
impact printer
LCD Display
Rubber keyboard
Tgas Tc K probe input
∆
P input (P2)
Draft/Pressure input
(P1)
GAS INLET
Printer wireless port
Charger connector
Tair Pt100 probe input
Back-light sensor
External probe input
At the bottom of
UniGas 1000
you can see all sampling probe connectors: gas inlet, and differential pressure /
draft inputs.
On the left side are the connectors for: line power charger and IR serial port for external wireless printer.
On the right side are the connectors for: auxiliary probes, the thermocouple type K for flue gas temperature.
The operator interface is on the front of the instrument and it consists of: a high contrast LCD display and a 9
button keypad. An automatic backlight device makes reading the data on display much easier.
