Manual instruction MM850482 ed.04
40
8 MAINTENANCE
The UniGas 1000
analyzer has been developed and manufactured using high quality components. A correct
systematic maintenance will prevent damage and will increase the life of the instrument, and provide excellent
results. Any conditions that require extraordinary maintenance interventions are promptly displayed, either
clearly or with an information code.
8.1 Printer
Maintenance
Open both the covers pressing as in figure, to change the paper and/or the ribbon.
Remove the exhausted paper roll. You can use standard paper, roll but you have to check before for its
dimensions (max. 57mm ±1mm large).
If necessary substitute the ribbon cartridge (cod. EE490002).
Approach the end of the new paper roll (cod. EE340006) to the slot under the printer.
Turn on the analyzer on.
Press the [
] key down; press the [
MENU
] key until the “
FEED
” message is displayed.
Press [
ENTER
] for paper feed. Press the [
ESC
] key when the paper will come out for some centimeters.
Close the cover inserting the paper end in its slot.