Manual instruction MM850482 ed.04
18
By pressing the [
REF. O
2
] key, the measured parameters will be referred to the user defined programmed
oxygen value. When selecting this mode, the first line on the top of the display will be replaced by the
message “
REF O2CO
”.
NOTE:
THE INSTRUMENT AUTOMATICALLY DETECT A CONDENSATING OR A NOT CONDENSATING BOILER
.
I
F A
CONDENSATING BOILER IS DETECTED
,
THE DISPLAY WILL CHANGE AS FOLLOWS
,
AND THE CONDENSING EFFICIENCY VALUE
WILL BE DISPLAYED
:
6.1.3 Fuel
Type
Set-Up
In the measuring page the set fuel type is displayed on the first row
To change the fuel type use the following procedure:
