EUROCOM LCD PC User Manual Download Page 7

Page: 7 / 192

Preface

Power Safety

The computer has specific power requirements:

•

When you want to unplug the power cord, be sure to disconnect it by the plug head, not
by its wire.

•

Make sure the socket and any extension cord(s) you use can support the total current
load of all the connected devices.

•

Before cleaning the computer, make sure it is disconnected from any external power
supplies.

Do not plug in the power
cord if you are wet.

Do not use the power cord if
it is broken.

Do not place heavy objects
on the power cord.

Power Safety

Warning

Before you undertake
any upgrade proce-
dures, make sure that
you have turned off the
power, and discon-
nected all peripherals
and cables (including
telephone lines).

Summary of Contents for LCD PC

































































































































































































Search results

Summary of Contents for LCD PC

Reviews:

Related manuals for LCD PC

Brands by name

Popular brands

EUROCOM LCD PC, User Manual

Search results

Summary of Contents for LCD PC

Reviews:

Related manuals for LCD PC

Brands by name

Popular brands