16 Duct
The duct system allows to carry and distribute the heat generated from the heater also in
other environments different from the one where the machine is positioned.
Connection
The connection to the heater can be of two types:
- Connecting on top of the stove only through a tube
- Connection on the back of the stove using two pipes
The company Z.F. LTD recommend using smooth tubes, with sweeping curves that is
isolated and insulated to prevent heat loss along the way, also should not exceed 10
meters in overall length of the system because in this case it incurs the loss of heat
produced from the stove.
Regulation
The adjustment of the channeling can happen in two ways depending on the type of stove
you have:
- Manual Adjustment
- Automatic Adjustment
Automatic Adjustment
The adjustment of the air flow in this case is managed directly on the main display of the
heater, through the pressure of a few buttons, allowing independent adjustment of the two
additional fans. For each of the two fans are different possible types of regulation (see
table below). To change the parameters, press on button 1 (fan 2) and button 2 (fan 3).
Setting
Fan 2
Fan 3
A
Corresponding to the selected power
Corresponding to the selected power
0
Fan off
Fan off
1
Fixed speed preset
Fixed speed preset
2
Fixed speed preset
Fixed speed preset
3
Fixed speed preset
Fixed speed preset
4
Fixed speed preset
Fixed speed preset
5
Fixed speed preset
Fixed speed preset
