The pellet
To obtain the maximum performance, the ZF company advices you to use quality pellets that is
prescribed by the regulations
DIN51731.
Length:
20mm ± 20%
Diameter:
6mm
Calorific value:
4.9 ÷ 5.3 kWh / kg
The pellets must be stored in a dry place away from heat sources. The ZF company assumes no
responsibility for malfunction due to the use of poor quality pellets.
9 First ignition
Warning
The first ignition will have to be carried out by a qualified technician who will have to check:
-
That all regulations mentioned above and current regulations in the place of installation
have been enforced.
-
The correct installation: of the stove, the flue, the chimney pot.
-
That there is no risk of damage to the stove or to the room of installation. In case of
problems the ZF company disclaims any liability both civil and criminal.
First steps
Check that there are no objects on the stove (manual included) and proceed as follows:
-
Fill the hopper with pellets, opening the upper door and closing it again, making sure that
no foreign body is in the hopper. Take off the cover of the hopper only during its charging.
-
Check that the brazier is well positioned in its seat.
-
Check that the door is hermetically closed.
-
Supply power, throw the switch (placed in the back down below); the control display will
light up.
9.1 User interface
The console unity permits to talk to the controller by simply pressing some buttons. A display and
other LED indicators inform the operator that the stove is working. In programming mode are
displayed the different parameters that can be modified by pressing some buttons.
