9.4 Meaning of the LED
Led
Meaning when turn on
Icon
CHRONO
Chrono enabled
ALARM
Stove on the alert
GLOW PLUG
Glow plug on
AUGER
Auger in motion
FUMES ASPIRATOR
Fumes aspirator on
HEAT EXCHANGER-PUMP
Heat exchanger- pump on
NOT USED
Not used
9.5 Display
Display
Function
Conditions
Visualization
DISPLAY
Power
state
parameter
name
OFF
OFF+ROOM TEMPWORK POWER+HOUR
ON
ON+ ROOM TEMPWORK POWER+HOUR
LOAD
FED ROOM TEMPWORK
POWER+HOUR
WORK
ROOM TEMPWORK POWER+HOUR
PROGRAMMATION SELECTED PARAMETER
10 MODES OF OPERATION
Premise
The installer must make the first start by taking precautions, and must ensure that the safety devices
are working properly (Vacuum gauge, hopper temperature protection etc. ..). Any anomalies with the
installation can not be attributed directly to the ZF company. The installer must carry out any other
evidence he deems necessary and verify the operation of the buttons on the console.
10.1
Igniting the stove
Once the installation of the stove and the mandatory verification of the safety are over, operation
phase begins. To power the stove, simply connect the cable to the electrical outlet, press the power
switch located on the back of the stove at the bottom, moving from
position
0
to position
1
as shown in
(Figure 1)
Figure 1
